Vetus VF5 Specifikace stáhnout pdf (Strana 83)

Inspections and maintenance work to be carried out: page

1 Check the zinc anodes. 82

2 Drain off the water from the fuel system and fill the fuel tank. 84

3 Make sure that the engine fuel system is filled with a fuel mixture with protective

properties.

4 Flush out the raw water circuit with fresh water and if necessary fill with anti-

freeze.

Clean the heat exchanger if necessary. 86

5 Make sure that the cooling system is filled with a suitable anti-freeze. 87

6 Change the oil filter and the engine oil. 88

7 Change the oil in the gearbox. 88

8 Grease moving parts of the engine, including the turbo. 89

9 Clean the engine, remove any salt. Paint any rust spots and spray the whole

engine with a protective medium, for example CRC protective 6-66.

10 Disconnect the battery cables, charge the batteries if necessary and grease the

battery terminals.

5 Winter storage procedure

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 139 140

Žádné komentáře

Vetus VF5 Specifikace Strana 83